| Version | Release date | Short explanation |
| V4.76 | Aug-23 2013 | New feature: DLL/J-Flash: Added support for Analog Devices ADuCM320. New feature: DLL/J-Flash: Added support for ST STM32F052 series. New feature: DLL/J-Flash: Added support for Marvell 88MC200 series MCUs. New feature: DLL/J-Flash: Added support for ST STM32F429 series. New feature: DLL/J-Flash: Added support for ST STM32F439 series. New feature: DLL/J-Flash: Added sample project for ST STM32F429ZI New feature: DLL/J-Flash: Added support for Reneasas R-IN32M3 series CPUs. New feature: DLL/J-Flash: Added support for ST STM32F030 series CPUs. New feature: J-Flash: Added support for Renesas RX210 series devices. New feature: J-Flash: Added support for Renesas RX111 series devices. New feature: J-Flash: Added sample project for Analog Devices ADuCM320. New feature: J-Flash: Added sample project for Atmel AT91SAM9261 + DataFlash on SPI0. New feature: J-Flash: Added sample projects for ST STM32F030 series CPUs. New feature: J-Flash: Added sample projects for Reneasas R-IN32M3 series CPUs. Correction: DLL/J-Flash: Under special circumstances, erasing of NXP LPC29xx devices could fail. Fixed. Correction: DLL/J-Flash: RAM size for some Nordic Semi nRF51 devices corrected. Correction: DLL/J-Flash: Flash sectorization for some Nordic Semi nRF51 devices corrected. |
| V4.74 | Jul-16 2013 |
Correction: J-Flash: Incorrect flash information (custom RAMCode) caused problems in J-Flash. Fixed. Correction: J-Flash: Corrected flash size for ADuCM331 New feature: DLL/J-Flash: Added Cypress PSoC4 series New feature: DLL/J-Flash: Added Energy Micro EFM32WG (Wonder Gecko) series New feature: DLL/J-Flash: Added Nordic Semi nRF51922_xxAA New feature: DLL/J-Flash: Added ST STM32F405OE, STM32F405OG New feature: J-Flash: Added Atmel ATSAM4LC8A, ATSAM4LC8B, ATSAM4LC8C New feature: J-Flash: Added Atmel ATSAMD20 series New feature: J-Flash: Added startup dialog/wizard for project creation/selection. New feature: J-Flash: Added Nordic Semi nRF51422_xxAA, nRF51822_xxAA, nRF51822_xxAB New feature: J-Flash: Added sample projects for Atmel ATSAMD20 series New feature: J-Flash: Added sample projects for Energy Micro EFM32WG (Wonder Gecko) series New feature: J-Flash: Added sample projects for Cypress PSoC4 series |
| V4.72 | Jun-12 2013 |
Support for new MCUs added: TI CC2538NF11, CC2538NF23, CC2538NF53, CC2538SF23, CC2538SF53, CM2538SF23, CM2538SF53 Support for new MCUs added: Atmel AT91SAM4N8A, AT91SAM4N8B, AT91SAM4N8C, AT91SAM4N16B, AT91SAM4N16C Support for new MCUs added: Freescale MKE02Z16xxx2, MKE02Z32xxx2, MKE02Z64xxx2 When downloading into Kinetis data flash, under special circumstances an "address is out of data flash range" error was reported even if this was not the case. Fixed. Analog Devices ADuCM350: Not the full 384 KB flash could be programmed. Fixed. Under special circumstances, flash programming for MB9AF131K/L/M/N and MB9AF132K/L/M/N did not work correctly. Fixed. When the project specified a SN and this J-Link was not found, J-Flash connected to another one. Fixed. |
| V4.66a | Mar-25 2013 | J-Flash / Flasher: Under special circumstances, custom RAMCode handling did not work correctly and caused errors. Fixed. Flasher stand-alone: Under special circumstances, when using Multi-Bank support in stand-alone mode, Flasher could run into memory-allocation problems causing the flash process to be aborted with error. Fixed. |
| V4.62 | Jan-25 2013 | New feature: Support for some new MCUs added. Correction: Flash programming did not work correctly for Fujitsu MB9AF131K, MB9AF131L, MB9AF132K, MB9AF132L. Fixed. Correction: For some current LPC43xx devices reset did not work properly. Fixed. |
| V4.60 | Jan-14 2013 | New Feature: Support for some new MCUs added. New Feature: Added sample project TB6865FG.jflash New Feature: LPC1810, LPC1820, LPC1830, LPC1850 SPIFI flash programming support added. Correction: Cortex-M0 devices did not work properly under special circumstances. Fixed. Correction: Wrong device selected in the sample project ADuCRF101.jflash. Fixed. |
| V4.58 | Nov-29 2012 | New Feature: Support for some new MCUs added. New Feature: Some sample projects added. Correction: J-Flash used wrong sector size for some STM32F105/107 devices. Fixed. Smaller program corrections |
| V4.56a | Nov-05 2012 | Correction: CFI detection of 1x8 Bit NOR flash combination did not work properly. Fixed. |
| V4.56 | Oct-22 2012 | New Feature: Support for some new MCUs added. New Feature: Some J-Flash projects added. Correction: First entry of device list (MCU.csv) was not shown in device selection dialog. Fixed. Correction: RAMCode for LPC11Axx EEPROM programming did not detect some LPC1Axx devices correctly and reported an incorrect EEPROM size. Fixed. |
| V4.54d | Oct-16 2012 | Correction: First entry of device list (MCU.csv) was not shown in device selection dialog. Fixed. |
| V4.54b | Oct-02 2012 | Correction: RAMCode for LPC11Axx EEPROM programming did not detect some LPC1Axx devices correctly and reported an incorrect EEPROM size. Fixed. |
| V4.54 | Sep-11 2012 | New Feature: Support for some new MCUs added. New Feature: Some J-Flash projects added. Correction: Some Luminary/TI LM3S devices with internal ROM bootloader were not handled correctly, so programming of blank devices caused problems. Fixed. Correction: LPC18xx flash based devices: Under special circumstances, checksum was accidentally also merged into flash bank 1. Fixed. |
| V4.52a | Aug-17 2012 | Correction: Some Luminary/TI LM3S devices with internal ROM bootloader were not handled correctly, so programming of blank devices caused problems. Fixed. |
| V4.52 | Aug-03 2012 | New Feature: Support for some new MCUs added. New Feature: Some J-Flash projects added. Correction: When downloading data & configuration to Flasher ARM for stand alone mode, on Flashes where not all sectors have 2KB aligned end addresses (e.g. TMS470R1B1M sector 0) an incorrect data file was produced which caused a programming fail in Flasher stand-alone mode. Fixed. Correction: When having multiple Flashers connected and J-Flash was not configured to connect to a specific one, when selecting "Download to programmer" the emulator selection dialog popped up twice. Fixed. Correction: When programming serial numbers, J-Flash reported an error that no serial number list file could be found even in cases where no serial number list file was needed. Correction: Flash ID for EN29LV800BB was incorrect (0x1C22DA changed to 0x1C225B). Fixed. Correction: Custom RAMCodes with > 2 KB size were not handled correctly. Fixed. |
| V4.50k | Jul-02 2012 | Correction: Save data file as hex file did not work properly. Fixed. Correction: "Erase chip" option generated a timeout error on Atmel AT91SAM3U1x and AT91SAM3U2x devices. Fixed. |
| V4.50g | Jun-11 2012 | Correction: Under special circumstances, RAMCode for LPC11A EEPROM programming did not work properly when reading back EEPROM contents. Fixed. |
| V4.50 | Jun-01 2012 | New feature: Support for some new MCUs. |
| V4.46e | May-11 2012 | Correction: Incorrect data flash size reported for RX621/RX62N/RX62T devices. Fixed. |
| V4.46c | Apr-20 2012 | Correction: Programming of Atmel AT91SAM3S devices did not work properly in stand-alone mode. Fixed. Correction: When programming external flash memory, the device selection dialog popped up accidentally. Fixed. |
| V4.46 | Apr-12 2012 | New feature: Sample project LM4F232H5.jflash added. New feature: Support for some new MCUs. Correction: Under special circumstances, flashing of AyDeeKay uSobek devices could fail with "RAM check failed" |
| V4.44 | Mar-19 2012 | New feature: Support for some new MCUs. |
| V4.42 | Feb-07 2012 | New feature: Added sample project ADuC7124.jflash New feature: Support for some new MCUs. |
| V4.40c | Jan-24 2012 | New feature: Added Infineon XMC4500 New feature: Sample project XMC4500.jflash added. |
| V4.36l | Dec-02 2011 | Correction: It was not allowed to select "big endian" for Renesas RX devices. Fixed. Correction: If a project-relative script file path were used in the J-Flash CPU dialog, the path was not passed correctly to the DLL. Fixed |
| V4.36j | Nov-18 2011 | Correction: Some Freescale devices which are already supported, were not selectable. Fixed. Correction: Flash programming support for Freescale Kinetis K70 did not work correctly. Fixed. |
| V4.36i | Nov-11 2011 | New feature: Support for some new MCUs. New feature: Sample project S3FN41F.jflash added. Correction: J-Flash could crash if external flash memory required "soft unlocking" of flash sectors. Fixed. Correction: For ST STM32F407IG, STM32F407VG and STM32F407ZG J-Flash reported an incorrect flash size. Fixed. Correction: The following external NOR flash devices did not work properly. Fixed: Eon EN29LV800BB, EN29LV800BT, EN29LV160BB, EN29LV160BT |
| V4.36h | Nov-04 2011 | Correction: J-Flash could crash when creating Flasher ARM data files if a custom RAMCode / Flash auto-detection setting was used. Fixed. |
| V4.36 | Nov-04 2011 | New feature: Support for some new MCUs. |
| V4.34c | Sep-06 2011 | New feature: Support for some new MCUs. |
| V4.34 | Aug-26 2011 | New feature: Support for some new MCUs. New feature: Sample projects added. Correction: Flasher ARM stand-alone mode did not work properly. Fixed. |
| V4.32 | Jul-29 2011 | New feature: Support for some new flash devices. New feature: Flash programming support for Cortex-R4. Correction: Unsecure for Energy Micro EFM32Gxxx and EFM32TGxxx devices did not work properly. Fixed. Correction: J-Flash could crash when programming a LPC device and adding a valid checksum to the data which was programmed. Fixed. Correction: Old J-Flash projects which were configured for "NXP (Philips)" devices were not opened correctly. Fixed. |
| V4.20 | Sep-10 2010 | New feature: Support for some new flash devices. |
| V4.12 | Feb-26 2010 | New feature: Multibank support for Flasher ARM added. |
| V4.08a | Jun-29 2009 | New feature: Support for some new flash devices. |
| V4.06 | Jun-03 2009 | New feature: Support for some new flash devices. |
| V4.04 | Apr-09 2009 | New feature: Support for some new flash devices. Correction: Download to emulator did not work properly. Fixed. |
| V4.00 | Dec-16 2008 | New feature: Support for Toshiba TMPM330. Correction: CRC calculation did not work properly. Fixed. Correction: "Verify CRC" hangs on last sector in some cases. Fixed. Correction: Flash programming of SST flashes did not work properly. Fixed. |
| V3.96a | Nov-05 2008 | New feature: Support for some new flash devices. |
| V3.92 | Sep-30 2008 | New feature: Support for Flasher ARM. |
| V3.90b | Aug-22 2008 | Correction: Target CPU was not halted automatically. Fixed. |
| V3.90 | Aug-11 2008 | New feature: Support for some new flash devices. New feature: Support for some new ST devices. |
| V3.82 | May-16 2008 | New feature: Support for some new flash devices. |
| V3.80 | Mar-07 2008 | New feature: Support for SWD (Serial Wire Debug). |
| V3.78a | Dec-04 2007 | New feature: Support for some new flash devices. New feature: Support for Cortex-M3 devices. New feature: Support for ADuC7060 devices. New feature: Support for custom RAMCode. Improvement: Programming of second flash bank of ST STR91x devices. Improvement: Auto detection of JTAG scan chain configuration. |
| V3.74e | Aug-09 2007 | New feature: Support for some new flash devices. |
| V3.74d | Jul-27 2007 | New feature: Support for some new flash devices. Correction: Open *.bin files from commandline did not work properly. Fixed. |
| V3.74a | Jul-11 2007 | New feature: Option to select either engineering or simplified user interface mode. Correction: Flash programming for Atmel AT91SAM7A3 did not work properly. Fixed. |
| V3.72c | Jul-04 2007 | Improvement: RAMCode for Atmel AT91SAM7 series improved. |
| V3.72a | Jun-18 2007 | New feature: Support for some new Atmel devices. New feature: Support for some new flash devices. Correction: Chip erase on old ADuC702x devices did not work properly. Fixed. Correction: Verify CRC did not work properly in all cases. Fixed. |
| V3.70a | May-15 2007 | Improvement: New reset strategy for AT91SAM7 MCU's. |
| V3.68a | Mar-30 2007 | New feature: Support for some new NXP devices. |
| V3.66a | Mar-19 2007 | New feature: Support for some new flash devices. |
| V3.64a | Mar-08 2007 | Correction: Hex file parsing did not work properly. Fixed. |
| V3.62a | Feb-23 2007 | New feature: Support for some new Atmel SAM7 devices. |
| V3.60a | Feb-09 2007 | New feature: Verifying CRC of target instead of read back entire program. New feature: New menu entry "File|Merge..." allows merging of data files. New feature: Actions performed on "Auto" command can be configured. Improvement: Data window allows to edit items in gap areas. |
| V3.58a | Dec-22 2006 | Correction: Old reset commands of CPU init sequence did not work. Fixed. |
| V3.56b | Dec-01 2006 | Improvement: Feed watchdog for TI TMS470 devices. |
| V3.56a | Nov-30 2006 | New feature: Support for some new NXP (Philips) LPC devices. New feature: Support for some new flash devices. New feature: Automatically correction of PLL settings for TI TMS470 series. New feature: Identification of flash devices by flash ID look up. Improvement: Auto unlock flash sectors for Intel flashes and STR7 devices. Improvement: RAM check with auto RAM size detection. |
| V3.52a | Nov-16 2006 | New feature: Automatic CPU clock frequency detection. |
| V3.50a | Oct-17 2006 | Minor improvements. |
| V3.46a | Sep-29 2006 | Support for some new ST STR73xF devices added. |
| V3.44a | Sep-21 2006 | Support for ST STR75xF devices added. |
| V3.42b | Sep-13 2006 | Improved performance of verify data. |
| V3.42a | Sep-12 2006 | Support for some new flash devices added. Data files are displayed in target endianess. |
| V3.40a | Aug-21 2006 | Support for some new flash devices added. |
| V3.38a | Aug-16 2006 | Support for some new flash devices added. |
| V3.36a | Aug-01 2006 | Support for some new flash devices added. |
| V3.32a | Jul-24 2006 | Support for unsecuring MAC71xx devices added. |
| V3.30a | Jun-19 2006 | Improved performance since new DLL is used. Support for OKI ML67Q40xx devices added. |
| V3.24a | May-31 2006 | Support for some new flash devices. Improved performance since new DLL is used. |
| V3.20a | Apr-27 2006 | Support for CFI compliant flash devices. Support for some new flash devices. Support for securing / unsecuring flash memory. Some improvements. |
| V3.14a | Mar-14 2006 | Improved handling of AT91SAM7A3. Watchdog refresh for ADuC703x devices. |
| V3.12e | Mar-07 2006 | Minor improvements. |
| V3.12d | Feb-28 2006 | Minor improvements. |
| V3.12c | Feb-24 2006 | Minor improvements. |
| V3.12b | Feb-24 2006 | Program correction in JLinkRDI. |
| V3.12a | Feb-23 2006 | Added support for some new flash devices. Minor improvements. |
| V3.10e | Feb-21 2006 | Improved memory access. Improved JTAG handling. |
| V3.10c | Feb-10 2006 | Minor improvements. |
| V3.10b | Feb-09 2006 | Minor improvements. |
| V3.10a | Feb-08 2006 | Calculate CRC when opening data files. Added support for some new flash devices. |
| V3.00h | Feb-02 2006 | Minor improvements. |
| V3.00g | Jan-30 2006 | Some performance improvements. |
| V3.00d | Jan-13 2006 | New software package. Some performance improvements. Added support for some new flash devices / MCUs. |
| V2.16c | Dec-02 2005 | Added support for new flash devices. |
| V2.16b | Nov-10 2005 | Program correction: Serial number problem |
| V2.16a | Nov-08 2005 | Support for adaptive clocking. |
| V2.14a | Oct-25 2005 | Added support for new MCUs devices. Some performance improvements. Check if program area is empty before program. |
| V2.12b | Oct-10 2005 | Added new function "Disable MMU" to init sequence editor. |
| V2.12a | Oct-04 2005 | Added some new MCUs. Programming of some Intel flashes accelerated. |
| V2.10a | Sep-22 2005 | Added several new flash devices and some MCUs. Display current address during program or verify in progbar window. Change default settings: "Skip blank areas" is enabled. Data file handling accelerated. Rename STR710FR to STR710FZ (correct device name). |
| V2.04b | Sep-01 2005 | Added new project files for AT91RM9200. Automatically unlock sectors before erase or program. |
| V2.04a | Aug-19 2005 | Latest DLL with some improvements added. New flash chips supported. |
| V2.02a | Aug-05 2005 | Command line option added. |
| V2.00b | Jul-13 2005 | Minor improvements. |
| V2.00a | Jul-12 2005 | Latest DLL with some improvements added. |
| V2.00 | Jul-07 2005 | Added menu item 'help' to open user manual. New license management system. Improved erase algorithm for some Atmel flash devices. |
| V1.36g | Jun-23 2005 | Added a new project and a new flash device. |
| V1.36f | Jun-13 2005 | Divided all Analog Devices microcontrollers in different Revision steps. |
| V1.36e | Jun-09 2005 | Improved support for Intel flash chips. |
| V1.36b | May-24 2005 | Improved support for 2x 16bit configuration with Intel flash chips. Improved support for big endian devices. |
| V1.36a | May-20 2005 | Add ability to connect with J-Link via TCP/IP. Add project for NetSilicon NS9360 eval. board. Add flash devices (M29DW323Dx / M29DW324Dx / M29DW640D). |
| V1.34a | May-17 2005 | Handling of scan chains with multiple devices. Support for Philips LPC 213x series. Minor program corrections. |
| V1.32a | April-22 2005 | Beta support for TI TMS470R1 A128/A256. New menu points "Read back sectors" and "Read back chip". |
| V1.30a | March-18 2005 | Support for second flash bank of STR71x series. New flash devices and MCUs supported. Minor program corrections. |
| V1.28d | March-11 2005 | Support for Pyhtec LPC2294 with external flash. |
| V1.28c | March-10 2005 | Full support for Samsung S3F445HX. |
| V1.28b | March-09 2005 | Improved support for Samsung S3F445HX. |
| V1.28a | March-03 2005 | Support for ATMEL SAM7 S32/S128/S256. Support for ST STR711 / STR712. Beta support for Samsung S3F445HX. |
| V1.26a | Feb-25 2005 | Added full support for ATMEL's SAM7. |
| V1.24c | Feb-18 2005 | Improved support for ATMEL's SAM7S64 chip. |
| V1.24b | Feb-15 2005 | Minor changes in JLinkARM.dll |
| V1.24a | Feb-03 2005 | Support for Analog Devices ADuC7020. |
| V1.22a | Jan-26 2005 | Lock/unlock support for some devices. Support for binary files. Export of setup files. MCU selection. Minor bug fixes. |
| V1.20b | Dec-21 2004 | Beta support for ATMEL's SAM7S64 chip. |
| V1.20a | Dec-14 2004 | Menu point "EDIT | Eliminate blank areas" implemented. |
| V1.18a | Nov-17 2004 | First version with release history |
This document was first released with version 1.18a of the software.
Software released earlier is documented internally.
This information is available at request.
Copyright 2001-2011 SEGGER Microcontroller GmbH & Co. KG. All rights reserved.
For more information, please visit our website www.segger.com or contact us at info@segger.com